1. Check the Analog phone Please test the same analog phone on the PSTN line or other ATA to confirm that there is dial tone coming out from this analog phone.
2. Check the Cable ATA--Rj11---ANL phone
3. All we should need to get a dialtone is the UID0 configured with the DN.
This parameter is the User ID (E.164 phone number) for the Phone 1 port. If the value is set to zero, the port will be disabled and no dial tone will sound.
Can we change the UseTFTP parameter to 0 to make sure it does not try and updated the config from somewhere else? Also we need to add the CME router's address to the Gateway field. Can you cut and paste me the information from the bottom of the ATA's web page?
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...