please try to bear with me this will be a little long. I was given a compaq proliant dl380 server running winows 2k with cisco call manager on it and 2 of the 7910 phones to use for training purposes, i have not hooked anything up yet or even powered on the server yet. I have never used this before and i have a few questions about it. I have currently running a hp proliant ml115 server with 2k3 running my dns and dhcp. It is just a member-server with no domain or active directory. Also i have running a cisco 3640 router and a 2914 enterprise switch and 4 1231 access points but only one of those are running. I was instructed to do a vlan on my switch for the voip server and phones which i will do to start out with. My questions:
I want to know if this version of call manager will run on 2k3 so i can update the compaq server.
Mosly just looking to see what books or links can be suggested for information
This version of CCM (Callmanager) will not run on Windows Server 2003. The only supported version for 2k3 is CCM 4.3(1)
Windows Server 2003
Cisco Unified CallManager Release 4.3(1), based on release 4.2(3), addresses the retirement of the MS Windows 2000 Operating System by enabling a migration of Cisco Unified CallManager to Windows Server 2003.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...