Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco Call manager & Tandberg integration

HI,

I have integrated Tandberg VCS with CUCM 8.0.3 over a SIP  trunk. I am facing below two problems:-

1. When Tandberg phone makes video call to CIsco 9971 phone. The call gets disconnected after about 2 -3 minutes, On CIsco phone call gets disconected & at Tandbeg phone call timer continues but without any video or voice.

2. When Cisco phone makes a call to Tandberg phone a fast busy tone is received.

Please suggest solution for it.

Regards,

AJ

1 REPLY
Cisco Employee

Re: Cisco Call manager & Tandberg integration

We'll need either detailed level traces from CUCM or a packet capture of both failures. Reference the following documentation to enable and collect traces.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

-Felipe

1685
Views
0
Helpful
1
Replies
CreatePlease to create content