Cisco call manager V8 & HiPath 3000 via IP

[MartinGSQ]

I need to know whether the Cisco Call manager V8.0 has been tested/approved on a Siemens HiPath 3000 V8/V9 via IP (H323 or SIPQ). If it has is there a document outlining how it is connected and what protocol was used and what features were tested. I work for Nashua Communications in South Africa and a customer has a call manager which we need to connect to. any help in regards to certification and/or testing would help.

[Rob Huffman]

Hi Martin,

Here is the only "interop" guide for Siemens/CUCM 8.x that I could find;

Siemens HiPath 4000 Release 5.0 using SIP trunk to Cisco Unified Communications Manager 8.5

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/984209.pdf

From the interop portal;

http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805b561d.html

Cheers!

Rob

"Always movin' ahead and never lookin' back" - Springsteen