Solved: Cisco CME 4.1 Factory Reset

Ryan Gioia · ‎02-22-2014

Hello,

I hope this post finds itself in the correct place.

I have a Cisco 1760 Router with CME 4.1 running on it. We have had some changes and I would like to completely wipe the configuration on it. I would like to keep the actual firmware ios operating system on it but would like to get ride of any configuration changes made in the CLI. Is there a way to do this?

Thanks!

Jaime Valencia · ‎02-23-2014

No, theres no way to reset CME or CUCM to a blank config, CME you would need to do the no version of all the commands you dont need/want

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎02-23-2014

No, theres no way to reset CME or CUCM to a blank config, CME you would need to do the no version of all the commands you dont need/want

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

Kevin Monteiro · ‎02-23-2014

Erase running-config.

Rate the post accordingly.

Regards,
Kevin

Sent from Cisco Technical Support Android App

islam.kamal · ‎02-23-2014

Hi

Can you find the below configuation?

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-123-mainline/46509-factory-default.html

Thanks

Please rate all useful information

Ryan Gioia · ‎02-24-2014

Thanks for your help. Since I don't want to erase the entire configuration, I guess I will just have to go back very carefully and make the changes manually since I can't wipe the config and start from a blank configuration. I appreciate your help.