Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco CME FXO issue with outgoing calls

Hi all,

I'm having couple of issues with the analog trunks.

1. Calls getting disconnected after one ring when we dial outside ( This is happening only intermittently)

2. Although customer has six analog lines, they coudn't dial outside after 2nd call (simultaneously)

voice-port 0/0/2

translation-profile incoming CALLER_ID_TRANSLATION_PROFILE

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

no battery-reversal

    no vad

cptone AE

connection plar opx 114

caller-id enable

Any suggestions please?

Everyone's tags (4)
1 REPLY
Hall of Fame Super Gold

Cisco CME FXO issue with outgoing calls

You should take "debug vpm signal" for a failed call.

You need to place voice-port in trunk group and use trunk group in dial peer to use all the ports.

630
Views
0
Helpful
1
Replies