Greetings, is it possible to keep the calling party ID when enabling SNR on a Cisco SCCP phone and a SIP Proxy.
We have a client who would like his/her mobile to ring when an incomming call is placed to their internal DDI but also present the original calling party ID to the mobile rather than there internal DDI number or outbound CLI
Eg: Customer ring internal DDI 0121 111 222, customer is calling from 0121 777 8888.
SNR is activated on the internal ephone-dn and places a call to the users mobile, business would like 0121 777 8888 to be displayed on there mobile rather than their internal DDI 0121 777 8888.
I'm trying to figure out the same thing here. I have a PRI and my provider (as
most do here in Ontario) will send what is given. Most of my customers calls will be within Canada and thus caller ID name/number info originates from the source. I'd also like to know how the originating caller id can be sent in SNR , and not the main number as listed in the translation profile. Customer want's to see who is really calling them (the originator) and not look like the office is calling them.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...