One of our customers is testing a Cisco 7920 wireless phone on his network. Cisco Callmanagers and IP phones are currently installed at this site. The customer does not have a Cisco wireless AP network. (Some other vendor wireless AP's installed) The 7920 phone registers with Callmanager and he can receive calls as well as dial out with the phone. After about a minute or two the Callmanager seems to reset and all the other IP phones needs to register again. This only happens when he uses the 7920 phone. What can be the issue with this?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...