We have Cisco CUBE and have configured multiple gigabit subinterfaces with different IPs to terminate different carrier and client SIP & H323 trunks.Now we are planning to configure a new Loop back interface with a new IP address on the CUBE and want to use this to terminate all future/new SIP & H323 trunks. Will this affect existing trunks? as I dont want to disturb existing trunk and want existing IPs configured on subinterfaces and used to established trunk to continue.Let me know.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...