I have a large customer who is planning a CER install with approximately 5000 IP phones. The customer maintains a database of switchport to location mappings through a separate application because they do several port moves, adds and changes a week. The issue is that, obviously when a switchport is re-patched to another location, it will need to be remapped to a different ERL. Is there any way to automate this process (perhaps by importing a list of switchport to ERL mappings on a nightly basis or something along those lines)? The customer would like to automate this as much as possible to avoid having his staff having to update this manually in CER every time a port is repatched.
I'm having much the same problem. It seems that people at my work like to play musical offices almost daily. We tried modifying the database from the CLI. Not much luck, seeing as we don't really know what the tables are called, much less how they relate. Anyone have any ideas?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...