Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco h.323 telephones

Hi everyone!

I can't find any information about what cisco telephones are supporting h.323 protocol.

There was a 7905G h.323 telephone, and now it is end of sales. Replacement is 6921 which is not supporting h323, or it is not written in the datasheet.

So question is simple - what cisco telephones support h.323?

Best Regards,

Aleksei

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Green

Cisco h.323 telephones

Aleksei

1) You may be able to get the cisco phones working to an AVAYA as SIP, but not as H323 anymore.

2) Yes you can integrate a CME to an Avaya using H323.

Cisco has some great documentation re what they call interoperability on this link.

http://www.cisco.com/en/US/netsol/ns728/networking_solutions_program_category_home.html

You need to have clue as to what the Cisco and the AVAYA devices are:-

E.g.

CME

http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805bd0ac.html

Then say you wanted:-

Cisco CME to AVAYA S8700 using H323

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns829/467019.pdf

You probably wonmt get the exact version numbers you want but the basic priciples will be very similar.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Cisco h.323 telephones

Answer is - NO.

Cisco phones support it's proprietary SCCP to work with Cisco UCM/CME/UC500 and also support SIP to maintain the standard.

The oldie Cisco 7940/7960 might support the SIP firmwares to connect with Avaya IPO/CM but that's not officially supported by Cisco - so it's not worthy to discuss here.

ATA186/187 is an analog gateway which supports H.323 but this is to connect your analog phones and fax machines only. It has one RJ45 port to connect the Ethernet cable and at behind there is 4pin RJ11 - so forget the ATA186/187.

As Alex asked you - if you are looking for integration between Cisco UCM/CME/UC500 to Avaya IPO/CM by H.323 protocol then forget what I explained so far. Answer for that question is - YES.

HTH.

7 REPLIES
Green

Re: Cisco h.323 telephones

Aleksei

I think you are out of luck nowadays.

The 7905 has gone.

You could use an ATA186 with H323 software.

The last relaese was :-

ATA Version 3.1.2 software for H.323

  ata_03_01_02_h323_040927_1.zip

3rd October 2004

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
New Member

Re: Cisco h.323 telephones

Hi acampbell,

We have avaya pbx and we need to know how can we interconnect avaya and cisco phones using h.323.

So Im searching now for h.323 phone.

This ATA186 is some kind of modem? How can I integrate it in my solution?

Regards,

Aleksei

Green

Cisco h.323 telephones

Aleksei

Are the Cisco phones working to a CUCM or CCME ?

Do you want to connect the CUCM (or CME) to the AVAYA ?

Or are you trying to get Cisco phone to work with the AVAYA.?

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
New Member

Re: Cisco h.323 telephones

As far as I understand, we need to get Cisco phone to work with the avaya.

Is it possible to connect CME and AVAYA using h323?

Aleksei

Green

Cisco h.323 telephones

Aleksei

1) You may be able to get the cisco phones working to an AVAYA as SIP, but not as H323 anymore.

2) Yes you can integrate a CME to an Avaya using H323.

Cisco has some great documentation re what they call interoperability on this link.

http://www.cisco.com/en/US/netsol/ns728/networking_solutions_program_category_home.html

You need to have clue as to what the Cisco and the AVAYA devices are:-

E.g.

CME

http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805bd0ac.html

Then say you wanted:-

Cisco CME to AVAYA S8700 using H323

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns829/467019.pdf

You probably wonmt get the exact version numbers you want but the basic priciples will be very similar.

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Cisco h.323 telephones

Answer is - NO.

Cisco phones support it's proprietary SCCP to work with Cisco UCM/CME/UC500 and also support SIP to maintain the standard.

The oldie Cisco 7940/7960 might support the SIP firmwares to connect with Avaya IPO/CM but that's not officially supported by Cisco - so it's not worthy to discuss here.

ATA186/187 is an analog gateway which supports H.323 but this is to connect your analog phones and fax machines only. It has one RJ45 port to connect the Ethernet cable and at behind there is 4pin RJ11 - so forget the ATA186/187.

As Alex asked you - if you are looking for integration between Cisco UCM/CME/UC500 to Avaya IPO/CM by H.323 protocol then forget what I explained so far. Answer for that question is - YES.

HTH.

New Member

Re: Cisco h.323 telephones

Thanks a lot,

Regards,

Aleksei

1838
Views
4
Helpful
7
Replies