Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IAD 2431: SIP user agent

Hi,

pls, any one can tell me how many SIP user agent can i put on IAD 2431 T1/E1?

exp Config for 1 sip user agent:

!

dial-peer voice 11111 pots

destination-pattern 11111

direct-inward-dial

port 1/0:15

forward-digits all

authentication username 11111 password xx

!

Cordially

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco IAD 2431: SIP user agent

Either use "service compress-config", or save/load config from server.

5 REPLIES
Hall of Fame Super Gold

Re: Cisco IAD 2431: SIP user agent

What is your purpose ? If you want to authenticate callers that do sip to pots calls, apparently you can use a different username for each port.

If you want to register your router to some external sip server, you can have only one set of credentials.

New Member

Re: Cisco IAD 2431: SIP user agent

Hi,

I have 150 sip user assotiated to dial_peer. each SIP user are registred to my SIP provider.

I want to know who many SIPuser/peer can'i use on IAD 2431.

see attached file

Thanks

Hall of Fame Super Gold

Re: Cisco IAD 2431: SIP user agent

I believe there is no hard limit.

New Member

Re: Cisco IAD 2431: SIP user agent

i think so, but the limit of the nvram can cause problem if the configuration file is big than nvram volume.

correct me pls.

Hall of Fame Super Gold

Re: Cisco IAD 2431: SIP user agent

Either use "service compress-config", or save/load config from server.

1088
Views
10
Helpful
5
Replies