I notice that IOS automatically change my calling and called number type when it detect my calling and called number match with North American Numbering Plan. I don't want it. Can anyone notice it before? Is this a feature of IOS?
Are there anyway to overcome this? I want type and plan to be Unknown without using voice translation rule. I mean to overcome the North American Numbering Plan detection feature of IOS.
.Jun 18 17:25:51.919 CDT: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Calling num 3123959300
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...