Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IOS CDR

Hi,

We have enabled GW File Accounting on Cisco IOS 2901 router for voice calls.

This is a SIP gateways and the CCSIP Mess debug shows as below:

 

=================================================================

INVITE sip:9980@52.23.23.36:5070 SIP/2.0
Via: SIP/2.0/UDP 12.0.1.25:5060;branch=z9hG4bK222B82A9C
Remote-Party-ID: <sip:85858585@12.0.1.25>;party=calling;screen=yes;privacy=off
From: <sip:85858585@12.0.1.25>;tag=7422D0E8-7B2
To: <sip:9980@52.23.23.36>
Date: Wed, 17 Sep 2014 18:03:37 GMT
Call-ID: C7FB2010-3DCB11E4-BF608137-34BABCD3@12.0.1.25
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Cisco-Guid: 3355083752-1036718564-3017275506-3928082504
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M6a
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1410977017
Contact: <sip:85858585@12.0.1.25:5060>
Call-Info: <sip:12.0.1.25:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 268
===============================================================================

 

In the CDR, there is a 'Call-ID' field.  We assumed that this value should be the same as that of the "Call-ID: C7FB2010-3DCB11E4-BF608137-34BABCD3@12.0.1.25" in the debug but that's not the case. Both the values are quit different.

Is it possible to get the Call-Id value in the CDR same as that of the debug message?

 

Regards

Saif

45
Views
0
Helpful
0
Replies