Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco IP Phone Firmware upgrade

Hi,

I have the following files on my router's flash.

apps42.8-4-1-23.sbn

cnu42.8-4-1-23.sbn

cvm42sccp.8-4-1-23.sbn

dsp42.8-4-1-23.sbn

jar42sccp.8-4-1-23.sbn

SCCP42.8-4-2S.loads

term42.default.loads

term62.default.loads

and

apps42.9-1-1TH1-16.sbn

cnu42.9-1-1TH1-16.sbn

cvm42sccp.9-1-1TH1-16.sbn

dsp42.9-1-1TH1-16.sbn

jar42sccp.9-1-1TH1-16.sbn

SCCP42.9-1-1SR1S.loads

term42.default.loads

term62.default.loads

How can i make sue that cisco ip phone 7962 phones take latest firmware which is 42.9. Right now they have 42.8 firmware?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Cisco IP Phone Firmware upgrade

Hi Omer,

The phone firmware is specified in Step # 5 below;

SUMMARY STEPS

1. enable

2. configure terminal

3. tftp-server device:firmware-file

4. telephony-service

5. load phone-type firmware-file

6. create cnf-files

7. end

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinstl.html#wp1070512

Cheers!

Rob

8 REPLIES
Hall of Fame Super Red

Cisco IP Phone Firmware upgrade

Hi Omer,

The phone firmware is specified in Step # 5 below;

SUMMARY STEPS

1. enable

2. configure terminal

3. tftp-server device:firmware-file

4. telephony-service

5. load phone-type firmware-file

6. create cnf-files

7. end

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinstl.html#wp1070512

Cheers!

Rob

New Member

Cisco IP Phone Firmware upgrade

So, i have 6 different files in my flash. I have to give tftp-server command 6 time and then load command 6 time???

Cisco IP Phone Firmware upgrade

That is correct,  You will have a entry per firmware file.

 

HTH,

 

Justin

New Member

Cisco IP Phone Firmware upgrade

i am getting the following error. When i am putting command

Router-CME(config-telephony)#load 7962 dsp42.9-1-1TH1-16.sbn

LOAD COMMAND ERROR:cnf-file location system is not supported for creating automatic tftp bindings. Please use file location flash | slot0 | tftp OR create tftp bindings manually

Re: Cisco IP Phone Firmware upgrade

Here is an example for a 7975 phone.

 

tftp-server flash:/PHONES/7975/apps75.8-5-3TH1-6.sbn alias apps75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/cnu75.8-5-3TH1-6.sbn alias cnu75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/cvm75sccp.8-5-3TH1-6.sbn alias cvm75sccp.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/dsp75.8-5-3TH1-6.sbn alias dsp75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/jar75sccp.8-5-3TH1-6.sbn alias jar75sccp.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/SCCP75.8-5-3S.loads alias SCCP75.8-5-3S.loads

tftp-server flash:/PHONES/7975/term75.default.loads alias term75.default.loads

 

Telephony-Service

load 7975 SCCP75.8-5-3S

 

HTH,

 

Justin

New Member

Cisco IP Phone Firmware upgrade

Same error

Router-CME(config-telephony)#load 7962 SCCP42.9-1-1SR1S

LOAD COMMAND ERROR:cnf-file location system is not supported for creating automatic tftp bindings. Please use file location flash | slot0 | tftp OR create tftp bindings manually

Updating CNF files

CNF files update complete for phonetype(7962)

Re: Cisco IP Phone Firmware upgrade

1. configure max-dn, max-ephone

2. configure time (clock set or ntp)

3. ip source-add port

4. load and create cnf

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_configuration_examples_list.html

New Member

Cisco IP Phone Firmware upgrade

I am getting the error but it worked for me. Thanks ROB and all.

Can i repeat the same process for cisco 7911 too? Or it works for only one phone model.

tftp-server flash:/PHONES/7975/apps75.8-5-3TH1-6.sbn alias apps75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/cnu75.8-5-3TH1-6.sbn alias cnu75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/cvm75sccp.8-5-3TH1-6.sbn alias cvm75sccp.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/dsp75.8-5-3TH1-6.sbn alias dsp75.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/jar75sccp.8-5-3TH1-6.sbn alias jar75sccp.8-5-3TH1-6.sbn

tftp-server flash:/PHONES/7975/SCCP75.8-5-3S.loads alias SCCP75.8-5-3S.loads

tftp-server flash:/PHONES/7975/term75.default.loads alias term75.default.loads

Telephony-Service

load 7975 SCCP75.8-5-3S

and same time i do for Cisco 7911

5924
Views
5
Helpful
8
Replies