Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco ip phone pickup without ring

Is there a way to define an extension so that it when it is dialed the called party can visually see that someone is calling and pickup without the phone ringing?

2 REPLIES
New Member

Re: cisco ip phone pickup without ring

If you are using 7940 you can use flash only option on a second line!

Hall of Fame Super Red

Re: cisco ip phone pickup without ring

Hi Bill,

Just thought I would add a little to Alessandro's good info;

Device>Phone>Directory Number Configuration

Directory Number Configuration Settings

Ring Setting (Phone Idle)

Use this field to configure the ring setting for the line appearance when an incoming call is received and no other active calls exist on that device. Choose one of the following options:

Use system default

Disable

**Flash only**

Ring once

Ring

From this 4.1.3 doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed74c.html#wp1245287

Hope this helps!

Rob

113
Views
0
Helpful
2
Replies