Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco isr router with call manager express

we have a cisco 2811 running call manager express and if the router is rebooted then the ip broadcast address with whatever the broadcast address is appears automatically on both fastethernet ports and causes issues with the ip phones registring with the system, they jsut do not register when this command is in. the minute we take it off the phones register.

if we take this two commands out and save the config and reboot they re-appear again.

version is c2800nm-spservicesk9-mz.124-9.T7.bin

also tried it on c2800nm-spservicesk9-mz.124-15.T7.bin and still the same.

2 REPLIES
Silver

Re: cisco isr router with call manager express

This is because you may not get .cnf file from CME.

New Member

Re: cisco isr router with call manager express

thats sounds correct but do you know why the ip broadcast address keeps re-appearing even though i take it and then after a reboot it re-appears again?

117
Views
0
Helpful
2
Replies
CreatePlease login to create content