came into work today to find our Cisco MCS 7800 With a red lite LES on the heartbeat next to the UID any ideas what this means I cant find anything on this subject? I've tried logging into the device and have been unsuccessful. I've also tried Pinging the server which I get a no response. Would appreciate any help with this problem.
If I'm not mistaken you have an MCS-7825 of the HP flavor. That LED as red usually indicates a critical system failure like Memory, CPU or similar. You'd best connect a monitor and keyboard to see what's up. If you have support I would also recommend a TAC case.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...