i have installed cisco mobile 8.0 on my iphone and when i try to join to the call manager over wireless (using tftp address and id i created on call manager), i am unable to join the call manager. i have included the tftp ip address on the dhcp of the wireless subnet
i configured the device (iphone) as mobile communicator on cucm...cant remember what exactly was that option. if it is a mobile device do i need to any specific settings on communicator (for example, if it is a iphone device then you add in mac address but for mobile you just add the user id, isnt it ?)
sorry pretty new to CUCM. we are running version 8.6 i cant seem to find software upgrades however i can see install/download files under bulk administration. is this where i upload the cop file. i managed to downloadn the cop file from cisco website. and once i do this do i need to restart the tomcat service ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...