Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Phone / 3com 5500 DHCP Problem

Ok here is my problem. I had to install CCUM 6.X in a 3com (5500's) environment (ick) everything seems to be fine… except for DHCP to the phone. The weird thing is if I set the PVID to the voice VLAN and tag the port for the voice VLAN and plug my notebook into the port I get an address from the Novell (*cough) DHCP server that correlates to that voice VLAN. If I plug the Cisco phone into that same port and don't set the admin VLAN ID on the phone, the phone gets a business network IP address from DHCP. If I set the admin VLAN ID to the voice VLAN… the phone gets no IP address at all from DHCP.

If I manually set TFTP, IP, VLAN, etc the phones work fine, no communications issues with CCUM.

I have configured the DHCP relay and UDP Helper address on the core stack to point to the Novell server.

Any ideas?

2 REPLIES
New Member

Re: Cisco Phone / 3com 5500 DHCP Problem

HELP?

Anyone?

New Member

Re: Cisco Phone / 3com 5500 DHCP Problem

Did you find a solution for this problem? Im having a very simular issue.

225
Views
0
Helpful
2
Replies