I have some issues upgrading Presence server. The existing presence server is 126.96.36.1990-12.. I am trying to pgrade to 7.0.6.x.x.x
When i insert the DVD and upgrade from DVD. the system doesnt show me any error MSGS..after i get upgrade complete .I tried to switch to newly created inactive partition 7.0.6x.x.x.
I tried from GUI and cli.. but nothing happens..
admin:utils system switch-version ? Syntax: utils system switch-version no parameters are required
admin:utils system switch-version
Active Master Version: 188.8.131.520-12
Inactive Master Version: 184.108.40.20600-17
Do you really want to switch between versions ?
Enter (yes/no)? yes
Switching Version and Restarting the Appliance ...
Please do not close this window until you see a Broadcast message from root.
Version switch has has been submitted. This can take a long time depending on the platform and database size. Please continue to monitor the switchover process from here. Please verify the system restarts and the correct version is active.
My questions are
1) which command can i use to see whats happening.
2) Where can i read the logs ?
Because nothing happens i am very curious to know.. Can anyone guide that whats going on and how can i fix this situation..This has wasted my 1 day..
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...