01-30-2014 05:07 AM - edited 03-16-2019 09:31 PM
Hello to all. Hope this mail finds all of you well.
I have a problem with a CUOM Prime 9.0 discovery configuration.
******
The customer's infrastracture is a cluster CUCM (VM), 9.1.2.
The CUCM cluster is up and running and all the cisco devices can be able to ping each other.
The customer wants to use a Cisco Prime Unified Operations Manager 9.0 in order to monitor all the Cisco devices.
The problem that I faced is that after the CUCM and CUOM 9.0 basic configuration,
in the CUOM 9.0 Device Management/Device Configuration, the discovery devices are "unreachable".
I have checked all the relative parameters and they seem to be ok.
*****
Can anybody help me on that "CUOM device discovery" problem?
Thank you very much in advance.
Regards,
Isidoros
Solved! Go to Solution.
01-30-2014 05:14 AM
Hi Isidoros,
Can you check the points mentioned in the following link
http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/faq/OMFAQ11.html#wp42542
HTH
Manish
01-30-2014 05:14 AM
Hi Isidoros,
Can you check the points mentioned in the following link
http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/faq/OMFAQ11.html#wp42542
HTH
Manish
01-30-2014 05:40 AM
Hello Manish.
Thank you for your help. It was a useful link.
Actually, the problem was a firewall problem.
Now, the CUOM device discovery works fine.
Regards,
Isidoros A.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: