Re: Cisco Secure Agent is blocking Virusscan auto update task
You can't edit the default rule set that comes with the standalone CSA variants.
What you can do is make sure you are running the latest version that's available (3.0.2 is several years old) - generally McAfee is on the list of 'supported' AV solutions, so if the newer versions of CSA interfere with it your only remaining option would be to open a TAC case and try and get them to fix up the rules.
Please rate helpful posts...
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...