Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Service Advertisement Framework (SAF-CCD) publish service

Hello All,

 

I have been following Mark Snow's INE CCNP Voice v8.x videos and I have hit a road-block. The Cisco Service Advertisement Framework (SAF-CCD) publish service is not working on my IOS forwarder router. I will post the configuration for both gw's (HQ & BR1) tomorrow; right now I cannot connect on this laptop due to the way my home lab is set up.

But my question for now is how do I verify the IOS forwarders on both routers. I have read CIPT2 book, CCD (ch3) in CUCM Features & services Guide & Cisco Voice Service Advertisement Framework Feature.

 

I know that I missed something somewhere, but cannot find out where. I have tried the various debugs/show commands and I have posted the issues with running configs & screen-shots on Cisco Site under title "RTMT Learned Pattern & SAF Forwarder processing error". After 300 views, still no help.

 

I am pleading for someone to point me in the right direction and help a brother out.

 

Thx-in-adv,

Frederick

  • IP Telephony
4 REPLIES
New Member

I am also facing same problem

I am also facing same problem with CUCM 9.1

New Member

Hey Guys & Gals,Thx -a-bunch

Hey Guys & Gals,


Thx -a-bunch for the info. I have been re-doing all the CIPT2 labs from start to finish and I got stuck SAF-CDD in RTMT again; so I re-visited this page for help again 4-months later. I ran RTMT as admin and I now see me forwarders reg. Now I need to troubleshoot why I am not displaying 'Learned Pattern'. but I am glad that y'all helped get RTMT to co-op:

HQ-CORP-1#sh voice saf dnDb all
Total no. of patterns in db/max allowed            : 4/6000
Patterns classified under dialplans (private/global) : 4/0
Informational/Error stats -
  Patterns w/ invalid expr detected while add    : 0
  Patterns duplicated under the same instance    : 0
  Patterns rejected overall due to max capacity  : 0
  Attempts to delete a pattern which is invalid  : 38

Last successful DB update @  2014:09:30 08:01:01:410

   ******** Private Dialplan Partition ********

Pattern - 85112XXX
  Primary Trunk-Route(s) ID       : 2
  Alias-Route(s) Prefix/Strip-Len : +55511555/4

Pattern - 85212XXX
  Primary Trunk-Route(s) ID       : 32
  Alias-Route(s) Prefix/Strip-Len : +55521555/4

Pattern - 85123XXX
  Primary Trunk-Route(s) ID       : 2
  Alias-Route(s) Prefix/Strip-Len : +66512555/4
         
Pattern - 85223XXX
  Primary Trunk-Route(s) ID       : 32
  Alias-Route(s) Prefix/Strip-Len : +66522555/4

 

   ******** Global (E164) Dialplan Partition ********

 - none -


HQ-CORP-1#

New Member

I have raised the same

I have raised the same question in this forum and got solution. 

Try to run the application Run as administrator from the pc . Thanks to Mr. Manish

Found these bugs that may

Found these bugs that may match:

https://tools.cisco.com/bugsearch/bug/CSCtx89569

https://tools.cisco.com/bugsearch/bug/CSCto90488

218
Views
10
Helpful
4
Replies
This widget could not be displayed.