Having issues getting our Yealink phones and LLDP. It seems no matter what configuration that I use I cannot get the SG300 to respond to the LLDP messages with the correct voice vlan. Here is my configuration that I am using, does anybody have any Yealink phones working with the SG300 using LLDP? Our Polycom phones work great and I have no issues but the Yealinks on the other hand never work.
co-test#show ver
SW version 1.4.0.88 ( date 06-Aug-2014 time 16:55:55 )
Boot version 1.3.5.06 ( date 21-Jul-2013 time 15:12:10 )
HW version V02
co-test#
co-test#show run
config-file-header
co-test
v1.4.0.88 / R800_NIK_1_4_194_194
CLI v1.0
set system mode switch
file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 2,88
exit
voice vlan id 88
voice vlan state oui-enabled
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 0004f2 Polycom
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 001565 Yealink
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
hostname co-test
!
interface vlan 2
name data
!
interface vlan 88
name flexvoice
!
interface gigabitethernet1
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet2
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet3
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet4
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet5
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet6
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet7
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet8
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet9
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet10
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet11
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet12
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet13
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet14
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet15
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet16
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet17
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet18
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet19
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet20
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet21
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet22
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet23
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet24
switchport trunk native vlan 2
voice vlan enable
no macro auto smartport
!
interface gigabitethernet27
switchport mode access
switchport access vlan 2
no macro auto smartport
!
interface gigabitethernet28
switchport mode access
switchport access vlan 88
no macro auto smartport
!
exit
co-test#
