Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco SIP Phone : Lost password

Hi,

I have 2 Cisco Phone (7905G) with sip firmware.

I lost the configuration password. So I can't change network settings.

Is there a way to do a factory default reset ?

Thanx,

Bastien.

2 REPLIES
Silver

Re: Cisco SIP Phone : Lost password

Restoring Factory Default Settings Perform the following steps to restore factory default settings when you forget the password.

Press *, 0, and the 4 softkey simultaneously. The manufacturing test-option screen appears.

Type 322873738# and press *.

Press *, 0, and the 4 softkey again, or power-cycle the phone. You return to normal operation.

Re: Cisco SIP Phone : Lost password

Alternatively - and probably easier,

You can register the phone with SCCP, and then switch it back over to SIP. If you have a CUCM 5/6 this is probably the easiest option. If this is standalone you'll be better off with the factory reset.

340
Views
0
Helpful
2
Replies