07-24-2014 02:00 AM - edited 03-16-2019 11:30 PM
Hello all,
We are in testing phase & integrated virtual Telepresence 4.0, virtual Conductor XC2.3 with CUCM 8.6.2 for Adhoc & Meetme conference.
We have end point SX 20 registered into CUCM. When we dial meet number from SX 20 its keep dialing & not connecting or answered by telepresnce.
I just noticed that there are no screen licenses are installed into TP Server.
Is it mandatory to have screen license to make conference calls ?
Can i apply for demo licenses file ?
Regards,
Conie
Solved! Go to Solution.
07-24-2014 10:20 AM
Yes, you will need screen licenses. As far as demo, I havent seen but worth checking with licensing@cisco.com
07-24-2014 10:20 AM
Yes, you will need screen licenses. As far as demo, I havent seen but worth checking with licensing@cisco.com
07-24-2014 12:15 PM
Hi George,
Thank your for reply.
I checked with licensing team, they said there is no temp or demo license for this product.
Regards,
Conie
07-24-2014 01:33 PM
Reach your SE/AM they might be able to help with a temporary license.
07-24-2014 05:14 PM
Thanks Jaime, for suggestion.
Will do that.
Regards,
Conie
07-25-2014 12:16 AM
Hi Conie,
I was refering the ordering guide which says
Cisco TelePresence Server Licensing
Cisco TelePresence Server is licensed by the number of screens, which depends on the number of simultaneous parties in conference, and presentation content resolution. Each screen license enables one 1080p participant to connect with up to 720p15 content sharing.
For example, two Cisco TelePresence Server screen licenses can support a conference of the following combination of endpoints:
● Two 1080p30 resolution endpoints
● Four 720p30 resolution endpoints
● Eight 480p30 resolution endpoints
● Sixteen 360p30 resolution endpoints
There are variations in the supported number of parties in a conference based on presentation content resolution, audio type, and different types of endpoints.
As suggested by Jaime, u can reach SE/AM for more details.
regds,
aman
07-26-2014 08:04 AM
Hello,
Got demo license with the help of SE :)
Regards,
Conie
07-26-2014 09:04 AM
[+5] to Jaime.
thanks for update.
regds,
aman
07-25-2014 12:36 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide