Cisco TSP, Vista, exchange 2007 and Office communicator R2
Since we installed Office communicator R2 as instant messaging system, we cannot use Cisco TSP Click to call from exchange as all called are sent to communicator. Have any of you manage to resolve this problem ?
Re: Cisco TSP, Vista, exchange 2007 and Office communicator R2
That is the restriction in MOC with multiple lines and multiple devices. In any version before presence 7.0.3 if you have a line shared with more than 2 devices the workaround is only to add the device you want to control in the TEL URI.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...