Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco UC on HP Switches

Does any one have qos and switch configs related to HP Switches running Cisco UC ?

specifically models such as

a. HP Procurve 5406zl

b. HP Procurve 3500yl

3 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: Cisco UC on HP Switches

I have not dealt with those specifially, but this is what I have done on other models:

Create VLAN for Voice
conf t
(config)# vlan 112
(vlan-112)# voice
(vlan-112)# end

Set QoS Priority on a VLAN
(config)# vlan 112 qos priority 6


vlan 112
   name "VLAN112"
   no ip address
   qos priority 6
   voice
   exit

New Member

Re: Cisco UC on HP Switches

Apologies.  I am on the road until Monday and missed that in your  post.  I just stopped for lunch and this is all I have onhand at the  moment.  I hope it helps you.

Hall of Fame Super Red

Re: Cisco UC on HP Switches

Hey Sankar,

Long time my friend! Hope life is treating you well

Have you looked at this doc;

Interoperability between Cisco Unified IP 7900
Series phones and ProCurve switches

http://h40060.www4.hp.com/procurve/uk/en/pdfs/application-notes/AN-C3_ProCurve-Cisco-IP-phone-7900-final-101308.pdf'

Cheers!

Rob

8 REPLIES
New Member

Re: Cisco UC on HP Switches

I have not dealt with those specifially, but this is what I have done on other models:

Create VLAN for Voice
conf t
(config)# vlan 112
(vlan-112)# voice
(vlan-112)# end

Set QoS Priority on a VLAN
(config)# vlan 112 qos priority 6


vlan 112
   name "VLAN112"
   no ip address
   qos priority 6
   voice
   exit

Re: Cisco UC on HP Switches

Thank you Joel, thats a very good start. I am interested also in

a. how to configure trust boundary with ipphones and pc's

b. how to cnfigure qos like in cisco switches assuming pcs are using ip communicators

c. configuring queue depths, dscp maps..etc like in cisco switches like 3560/3750 etc..

are there good white papers out there for this ? Or do you have a sample config you can send me ?

Very much appreciated..

New Member

Re: Cisco UC on HP Switches

Re: Cisco UC on HP Switches

Joel,

I know Cisco qos, i wasnt looking for Cisco switching qos, i was asking if you have any white papers or sample configs on the qos configs on a HP switch..specifically with hard ip phone and Pc  as well as hard ip phone, PC + soft phone etc...

New Member

Re: Cisco UC on HP Switches

Apologies.  I am on the road until Monday and missed that in your  post.  I just stopped for lunch and this is all I have onhand at the  moment.  I hope it helps you.

Hall of Fame Super Red

Re: Cisco UC on HP Switches

Hey Sankar,

Long time my friend! Hope life is treating you well

Have you looked at this doc;

Interoperability between Cisco Unified IP 7900
Series phones and ProCurve switches

http://h40060.www4.hp.com/procurve/uk/en/pdfs/application-notes/AN-C3_ProCurve-Cisco-IP-phone-7900-final-101308.pdf'

Cheers!

Rob

Re: Cisco UC on HP Switches

hi rob, long time..i have been so busy ...i have completely stopped responding at the forums

hope all is well 

New Member

Re: Cisco UC on HP Switches

I would just make sure to double check the port queue and 802.1p priority values for your specific HP models.

2226
Views
0
Helpful
8
Replies