Cisco Unified MeetingPlace to Use Blast Dial features
Hello CSC team,
We have installed Cisco Unified MeetingPlace Administration Center Version: 18.104.22.168 and we are going to use "Blast dail features" to dial out to all company members approx : 8000 user with CUCM. already we have intgrated with LDAP successfully . but we facing problem when we changing the Method of attending : by default setting is "Have User Call In " once i change to "Have System Find user " the main phone number will disappear and its seem to be empty box. because of this we aren't able to test the blast dial feature. or is their any procedure to the change the default setting of Method of Attending as "Have system find user " instead of " Have user Call in" .
So please advice highly appricated for your fast response.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...