Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Unified Operation Manager problem

Hi all,

I have operation manager server 2.0.3.It discovered 5035 out of 5969 ip phones i have in my ip telephony network.

I added all CUCM servers to it ,also all access switches on my network but still have the same problem.

Where is the problem?

Any ideas?

4 REPLIES
New Member

Re: Cisco Unified Operation Manager problem

Question: How many phones does CUCM RTMT find?

It is unclear if you may have remote sites in SRST, data switches that are unavailable or non-CDP enabled, etc.

Thanks,

Alex

New Member

Re: Cisco Unified Operation Manager problem

All my ip phones are centralized at HQ,no branshes.I have 5969 ip phones registered to my CUCM cluster.

I checked for reachability for the switches plus CDP is enabled on all my switches.

Any ideas?

New Member

Re: Cisco Unified Operation Manager problem

Am assuming that you have sufficient CUOM licenses - can you verify that all are listed in CUOM licenses?

Are the "un-reported" phones all one type, or one gateway or some other shared characterisic?

If you delete some "reported" phones, and re-run discovery, do you see some previously "un-reported" phones?

New Member

Re: Cisco Unified Operation Manager problem

i will try morrow morning..but what u r suspecting in ?

210
Views
0
Helpful
4
Replies