Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cisco unity 5.0

hi,

i try to integrate unity 5.0 with one cluster ( publisher(backup) and subsriber(primary)).

in the process of integration, when connection try to check voice ports, the process fail with subscriber end success with publisher.

schud i create voice port (wizard) just in the publisher or both publisher and subscriber. now i just make it in the publisher.

thanks

4 REPLIES

Re: cisco unity 5.0

All configuration you do on publisher only.

VM ports will be registered with publisher.

New Member

Re: cisco unity 5.0

thanks for your quick reply.

i have created : voice ports and pilot number and MWI like integration guide. and i can ping from unity server both publisher and subscriber. but always the unity can't check ports with subscriber( failed), is this a problem ?

when i press phone message button i don't hear anything.

Re: cisco unity 5.0

Try to call pilot number. If I remember correctly you will need VM profile to use with message button.

From subscriber CM administration page you should see ports registered on publisher.

rate if this help.

Re: cisco unity 5.0

Btw you should add line group, hunt list and hunt pilot with same number like your VM pilot.

Check this guide for more information: http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/integration/cucm_sccp/guide/cuintcucmskinny060.html

119
Views
0
Helpful
4
Replies
CreatePlease to create content