I’ve never done this. It’s just a thing which came to my mind ;) Maybe you will give this a try.
1. Create a “Message Aging Policy” which will delete the messages after one day. 2. Make sure every user is linked to this Policy 3. Wait one Day 4. Check if the messages are gone 5. Edit the Message Aging Policy to a value which is usefull (for example 15 days)
Please be careful when deleting “everything” often users depend on some messages on their mailbox. If you run out of storage, maybe a proper configured Message Aging Policy will do the trick.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...