Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cisco2801-ccme-k9 - DSP?

Hi, I've specced this up for a customer. I've also added a VWIC2-1MFT-T1/E1= . I dont need to order any DSP's do I? ie they should come as part of the bundle surley?

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Re: cisco2801-ccme-k9 - DSP?

I believe this bundle comes with a PVDM2-8 - an 8 channel DSP module.

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd804e773d.html

To support 24 channels on the VWIC2-1MFT-T1/E1, you would need a minimum of 2 DSPs - a PVDM2-16 + one PVDM2-8. Check the DSP calculator for confirmation:

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

Hope this helps.

Brandon

2 REPLIES

Re: cisco2801-ccme-k9 - DSP?

I believe this bundle comes with a PVDM2-8 - an 8 channel DSP module.

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd804e773d.html

To support 24 channels on the VWIC2-1MFT-T1/E1, you would need a minimum of 2 DSPs - a PVDM2-16 + one PVDM2-8. Check the DSP calculator for confirmation:

http://www.cisco.com/cgi-bin/Support/DSP/dsp-calc.pl

Hope this helps.

Brandon

New Member

Re: cisco2801-ccme-k9 - DSP?

spot on, thanks mate

99
Views
0
Helpful
2
Replies