Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CIUS on CUCM 8.5.1.11900

Hi,

As per Cius data sheet, it supports on CUCM8.5.1 and 8.6 but I cannot find a device option "Cisco Cius" on CUCM8.5.1 even I installed Cius COP file.

How to configure Cius device on CUCM8.5.1.11900 (unrestricted)?

Thanks in advance,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

CIUS on CUCM 8.5.1.11900

you need to install the latest device pack as well. you can find the device pack on the cisco.com.

thanks,

Vipul jindal

13 REPLIES
Cisco Employee

CIUS on CUCM 8.5.1.11900

Have you done a cluster reboot after installing the cop file?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CIUS on CUCM 8.5.1.11900

You don't need to do a cluster reboot after installing the cop file, just restart the TFTP service on all servers running this service in the cluster. Once complete the CIUS should appear in the device drop-down list.

Cisco Employee

CIUS on CUCM 8.5.1.11900

you need to install the latest device pack as well. you can find the device pack on the cisco.com.

thanks,

Vipul jindal

New Member

CIUS on CUCM 8.5.1.11900

Thanks Vipul, resolved by installing latest device pack.

New Member

CIUS on CUCM 8.5.1.11900

Guys,

I have a Cius and trying to connect to UCM. Where is best place to find installation guide?

UCM is 7.13, but i understand minimum version is 7.15?

What are the settings for registering within the UCM?

Any help much appreciated.

Cisco Employee

CIUS on CUCM 8.5.1.11900

The way to configure the CIUS is exactly the same as any other phone.

Add new phone -> CIUS -> MAC address and your regular settings (DP, security mode, etc) then add the DN.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CIUS on CUCM 8.5.1.11900

Use the Ethernet MAC not the wireless MAC, regardless of your connection media. The CIUS uses the Ethernet MAC during registration.

New Member

CIUS on CUCM 8.5.1.11900

Thanks for all your help. CIUS is registered to UCM 8.6 now, but getting rejected on the registration? Can see the registration on the UCM with an ip address. any ideas?

New Member

CIUS on CUCM 8.5.1.11900

On first registration the CIUS looks to have registered but the telephony isn't available for some time (a few minutes) whilst it upgrades firmware etc. If it still doesn't complete it's registration after 5-10 minutes then use the status messages (I think it's Settings>>About>>Status Messages) on the CIUS to identify any issues.

New Member

CIUS on CUCM 8.5.1.11900

Thanks. Yes i can see from browsing the CIUS it's showing:

HTTP no error : SEP6400F11676.cnf.xml

In the UCM i've just added as a CIUS, and put the mac-address as 6400F11XXX etc.

Is this correct?

New Member

CIUS on CUCM 8.5.1.11900

Yes, that looks correct

New Member

CIUS on CUCM 8.5.1.11900

Hi,

How can i download 8.5.1.13032-1 ?

Cisco Employee

CIUS on CUCM 8.5.1.11900

hello,

if u need a specific ES, you need to open a tac case and tac engineer can publish it for u.

thanks,

Vipul Jindal

2766
Views
0
Helpful
13
Replies
CreatePlease login to create content