Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Class of Restriction - SIP

Hello All,

Can someone point me in the right direction with my config.  I've read the tech notes and have implemented the folloiwng basic COR config on my CME environment but I'ts not restriciting the calls.

In summary I have a SIP handset which I want to only allow internal calls only.  I have the following;

dial-peer cor custom

name internal

name pstn

!

!

dial-peer cor list call-internal

member internal

!

dial-peer cor list call-pstn

member pstn

voice register pool  11

busy-trigger-per-button 2

id mac 1C17.D3C2.5XXX

type 9951

number 1 dn 13

template 2

cor incoming call-internal 1 1  (not sure how the COR tag works as can't find SIP Specifics)

presence call-list

dtmf-relay rtp-nte

username Davidpassword David

codec g711ulaw

camera

video

dial-peer voice 3 pots

trunkgroup PSTN

corlist outgoing call-pstn

description ** Unrestricted **

preference 2

destination-pattern .T

progress_ind alert enable 8

progress_ind progress enable 8

progress_ind connect enable 8

no digit-strip

I've been using this as my reference but applies to SCCP.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Any advice is appreciated

Dave

Everyone's tags (3)
2 REPLIES
Hall of Fame Super Gold

Class of Restriction - SIP

Update IOS and check again.

VIP Super Bronze

Class of Restriction - SIP

This needs to say:

cor incoming call-internal default

As you have it now, it only applies the cor list against dial-peer tag 1, assuming that's even a legitimate outgoing dial-peer.

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify helpful or
386
Views
0
Helpful
2
Replies