Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CLID is not working in VG224

Dear Friends,

              I configured VG224 using SCCP protocol.After updating the IOS version  of VG224 from vg224-i6s-mz.12.4(2)T6 to vg224-i6s-mz.12.4(22)T5 the analog phones not displaying CLID (Calling number).Is it bug or not.?.If it is bug which IOS i need to use ?.I am alslo configured SRST support on VG224.

Many Thanks.........

Nisam..

Everyone's tags (1)
4 REPLIES
Cisco Employee

Re: CLID is not working in VG224

Can  you provide us with the current running configuration of the VG224? Caller ID is discussed in the following document.

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html#wp1101486

-Felipe

New Member

Re: CLID is not working in VG224

Dear Filip,

        Please find the attachemente .It is containing output of show run,show version.For you information i am saying that before updating the IOS it is working.The problem started after updating the IOS.

Many Thanks,

Nisam.

New Member

CLID is not working in VG224

Hi,

Did you ever get this resolved? We are having a similar issue with caller ID not appearing correctly on a device attached to a VG224 port. We are running 12.4(24)T4.

Thanks - Rob.

CLID is not working in VG224

We found that there are issues with CLID & MWI on some IOS versions for the VG224s. The bug is locale dependant.

We're using vg224-i6k9s-mz.151-3.T3.bin at the moment, and that's working fine.

GTG

Please rate all helpful posts.
495
Views
0
Helpful
4
Replies
CreatePlease to create content