Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Cluster b/w different hardware servers

hi all,

can we make cluster between two different MCS Servers e.g. publisher is MCS 7835 & Subscriber is MCS 7825 ????

Regards

1 REPLY
Hall of Fame Super Red

Re: Cluster b/w different hardware servers

Hi Nasry,

Servers within a Cluster do not need to match. So you can use a mix of 7825,7835,7845 models within the Cluster.

General Clustering Guidelines

The following guidelines apply to all Unified CM clusters:

--------------------------------------------------------------------------------

Note A cluster may contain a mix of server platforms, but all servers in the cluster must run the same Unified CM software release.

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/callpros.html#wp1043559

Hope this helps!

Rob

153
Views
4
Helpful
1
Replies