Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cluster in UCCM 6.X

Hello I have a question.

I have the next scenario.

Cluster A Cluster B both have CAPF and CTL.

How can I to do to ip phone in cluster B can register in cluster A But without to do reset factory a ip phone. Can I to do move CCM (Tftp,CCM,CAPF)from cluster B to Cluster A. I think that ip phone from Cluster B it could registers to cluster B if within of CTL exits the same CCM,TFTP and CAPF.

any can help me?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Cluster in UCCM 6.X

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.

1 REPLY
Silver

Re: Cluster in UCCM 6.X

To register the IP Phones to a different Cisco CallManager the TFTP server address will be provided by the DHCP server at your local network, but in this case you want to use a different TFTP server from the one configured on the DHCP server, you have to enter a specific TFTP server on the IP Phone.

102
Views
0
Helpful
1
Replies