CM 5/6/7 :- Admin and App uid / passwd in a Cluster
If I have a CM (5.x / 6.x or 7.x) cluster, I know that the security password needs to be the same on all servers.
However, I am not sure about the platform admin and Application user id's and passwords.
Can they be different for each server ?
If that is the case, and I want to admin the cluster from one of the servers, would I need to enter the uid / pwd for the Application User (Web UI logon for admin page) that is specific to that server ? Or would it be the uid / pwd that was set for the first node (publisher)?
I looked at the install docs, and its not clear from them on this point. They seem to suggest using the same uid / password combination for all servers.
But it looks like only the DB security password is REQUIRED to be the same.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...