Guys, i am a little confused with licencing scheme used in CM. if i am making a proposal for call manager which licenses i have to include and why ?
like for example, i am going to use MCS server 7825, with CM 7.1 and the total number of device are 100 which includes 80 units of 7911 and 20 units of 7940 phones. based on the above details i came up with a BoQ like this:
- MCS7825I4-K9-CMC2 : this will be CM server.
- LIC-CM7.1-7825= : this is the applicance licences for the 7825 server
- LIC-CM-DL-100= : this is the Device unit licences
Now, are these licences ok or am i missing somoething like this part number: CM7.1-K9-X3250-M2
Q2: when i have purchase the DLU license, do i have to purchase the phone licences seperatly as well like this part number: SW-CCM-UL-7965 .
If you are doing DLU-based licensing, your count is wrong. It is not a 1x1 phone to DLU ratio. The number of DLU's consumed by a phone varies but for 794X/796X, you generally need 4 DLU's per phone. I do not recall the 7911 off-hand but that is definitely off. If you are doing CUWL (or UWL) licensing, this becomes an entirely different conversation.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...