Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CM on dl320

Hi

I am learning VOIP and truing to set up a lab , I found this server and I would like to install CM, my question is

can I do that ?

what CM Ver. do I need ?

what os needed to be install on dl320 before I install CM ?

any wite paper or how too for this platform ?

THanks

HP Proliant DL320 G2 Server

2.66 Xeon Processor

2x 80GB Harddrives (Can do raid 1 or 0)

4GB RAM

Rackmountable 1U form factor

2 REPLIES
Cisco Employee

Re: CM on dl320

This link contains the list of supported platforms

Supported Cisco Unified Communications Manager Releases by Server

http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

What version you need depends on what you can get your hands on, i'd recommend at least 6.1(x), preferably 7.x but your server does not meet the 3 GHz requirement

OS is installed with CUCM, Windows version were a separate OS install from CCM.

Install is rather simple, load DVD and fill in the blanks. If you want to read something before, refer to install guides available on CCO

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CM on dl320

I am just going to stay w/ cisco equip for now. as newbie to the voice world. any idea for cheap routers that will support CM I know I need to get some type of voice gtwy to create the real scenario ..

THanks

122
Views
4
Helpful
2
Replies
CreatePlease login to create content