Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CM6 and VG200s

Hi all. I'm just wondering if a VG200 can be used as an H323 gateway with CallManager 6. I would think that with H323 the model wouldn't matter at all.

Anyone know for sure?

Thanks

Justin

1 REPLY
Cisco Employee

Re: CM6 and VG200s

VG224 can be configured for H323, MGCP and SCCP, VG248 is only SCCP

just found the link:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a0080091de1.html

•Lower cost of ownership-The Cisco VG200 communicates with the Cisco CallManager using the Media Gateway Control Protocol (MGCP) or H.323 Version 2. It allows connectivity between a Cisco CallManager-based IP telephony system and legacy telephony equipment such as the PSTN, private branch exchanges (PBXs), and voice-mail systems. The Cisco VG200 provides a space-saving solution that can be managed remotely using network management applications such as CiscoWorks.

as you mention, CUCM version is really not relevant.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
103
Views
5
Helpful
1
Replies
CreatePlease to create content