Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 3.2 register phone ver VPN

I?m trying to register a phone over a VPN connection. The router is located in the office, I have a cisco 1801 router at home with a point to point VPN between the 1801 and the PIX 515 at the office.

When the phone that I want to use at home is plugged into the switch in the office the phone registers ok. No problem and I?m able to call other phone in the office. When I plug the same phone into the 1801 at home it tires to register but the fails. This is the message that appears on the CME router:

Sep 6 23:16:14.401: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP000F23839D08 IP:

192.168.103.78 Socket:1 DeviceType:Phone has unregistered normally.

*Sep 6 23:16:22.418: %IPPHONE-6-REG_ALARM: Name=SEP000E386DCFEB Load=CP79050101

SCCP030530B.zup Last=CM-aborted-TCP

On the 1801, DHCP is configured with option 150 pointing at the CME router.

I can ping from home the CME router and everything else on the works subnet.

Any ideas on whats up here ?

I?d appreciate any help.

Thanks.

Craig.

2 REPLIES
Hall of Fame Super Gold

Re: CME 3.2 register phone ver VPN

When home, what the phone displays?

Dos it get the correct address, and can you ping it ?

New Member

Re: CME 3.2 register phone ver VPN

I have a bigger problem with the CME router now. I think I'm going to have to sort this out first. From work I could ping the phone, but now the CME router is broke!

I'll post back when the CME router is fixed. thanks for your help.

128
Views
0
Helpful
2
Replies