CME 3.3 and 7940

[Rajesh Revuru]

I am just curious to know if 7940 is supported with CME 3.3? When i try to add load 7940, there is no option for 7940 phones.

[Rob Huffman]

Hi Rajesh,

How are things my friend :) I think the command should be;

The Cisco Unified IP Phones 7940 and 7940G and the Cisco Unified IP Phones 7960 and 7960G have the same phone firmware and share the 7960-7940 keyword.

Router(config-telephony)# load 7960-7940 P00303020209

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_l1ht.html#wp1017771

Hope this helps!

Rob

PS: I'm sure these sets have been supported since at least 3.0