Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 3.3 http issue

We are running CME 3.3 and have issues regarding setting up extensions and phones using the HTTP browser. If we try to assign a button to the phone then click ok and save we just get errors on page in the internet explorer.

is this a java issue, if so what java should we use?

2 REPLIES
Silver

Re: CME 3.3 http issue

The ip http server command must be enabled on Cisco CallManager Express. However, if only https (ip http secure-server) is enabled, this command does not work. Both commands must be enabled.

New Member

Re: CME 3.3 http issue

Hi,

we have the below config in the ccme router.

ip http server

ip http authentication local

ip http secure-server

ip http timeout-policy idle 60 life 86400 requests 10000

ip http path flash:

96
Views
0
Helpful
2
Replies
CreatePlease to create content