Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 4.0: 7940 displaying wrong time, 7911G displaying the right time info

Hello,

I have got the following setup:

IOS version 12.4.(4)XC7 (CME version 4.0) with 7911G en 7940G phones.

We have the following problem : on 7911G, the time is right, however, on

2 7940, the time is incorrect. (1 hour difference)

Any idea how to troubleshoot on this ?

Many Thanks

Dirk

show version

Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version

12.4(4)XC7, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 01-Aug-07 00:15 by alnguyen

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

CSPRAGUE2 uptime is 17 hours, 52 minutes

System returned to ROM by reload at 17:48:28 CET Mon Dec 3 2007

System restarted at 17:51:04 CET Mon Dec 3 2007

System image file is "flash:c2800nm-spservicesk9-mz.124-4.XC7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be

found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2821 (revision 53.51) with 237568K/24576K bytes of memory.

Processor board ID FHK0915F18G

2 Gigabit Ethernet interfaces

1 Serial interface

4 ISDN Basic Rate interfaces

1 terminal line

1 Channelized E1/PRI port

1 cisco service engine(s)

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

!

!

!

!

tftp-server flash:P0030702T023.bin

tftp-server flash:P0030702T023.loads

tftp-server flash:P0030702T023.sb2

tftp-server flash:P0030702T023.sbn

tftp-server flash:P00405000700.bin

tftp-server flash:P00405000700.sbn

tftp-server flash:CP7912080001SCCP051117A.sbin

tftp-server flash:dsp11.1-0-0-73.sbn

tftp-server flash:DistinctiveRingList.xml

tftp-server flash:Ring1.raw

tftp-server flash:Ring2.raw

tftp-server flash:Ring3.raw

tftp-server flash:Ring4.raw

tftp-server flash:Ring5.raw

tftp-server flash:Ring6.raw

tftp-server flash:Ring7.raw

tftp-server flash:Classic1.raw

tftp-server flash:Classic2.raw

tftp-server flash:Bass.raw

tftp-server flash:music-on-hold.au

tftp-server flash:apps11.1-0-0-72.sbn

tftp-server flash:cnu11.3-0-0-81.sbn

tftp-server flash:cvm11.7-2-0-66.sbn

tftp-server flash:jar11.7-2-0-66.sbn

tftp-server flash:SCCP11.7-2-1-0S.loads

tacacs-server administration

!

3 REPLIES
Hall of Fame Super Gold

Re: CME 4.0: 7940 displaying wrong time, 7911G displaying the ri

Hi,

have you configured the correct time-zone under telephony service ?

New Member

Re: CME 4.0: 7940 displaying wrong time, 7911G displaying the ri

Yes, timezone 26 has been configured.

Best Regards

Dirk

Hall of Fame Super Gold

Re: CME 4.0: 7940 displaying wrong time, 7911G displaying the ri

Have you configured summer-time ?

Can you try FW 8.0(7) on the 7940 ?

291
Views
0
Helpful
3
Replies