I am using CME 4.1 on a 2811 router which has a 2 port FXS card
We need to install 2 analog phones and want them to communicate with the IP phones registered to the CME
Can anyone let me know the configuration required on the CME or point me to a link.
Heres my CME config
voice-port 0/2/0
station-id number 17000
!
voice-port 0/2/1
telephony-service
load 7910 P00405000700
load 7960-7940 P0030702T023
max-ephones 10
max-dn 10
ip source-address 10.100.192.1 port 2000
max-redirect 10
auto assign 1 to 10
time-format 24
date-format dd-mm-yy
voicemail 8000
max-conferences 8 gain -6
moh music-on-hold.au
web admin system name sysadmin secret 5 $1$vDUJ$FVNdefC0fN5RtegC5x1Qi1
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Oct 04 2007 14:35:56
!
!
ephone-dn 1 dual-line
number 15001
label Test1
name Test1
call-forward busy 8000
call-forward noan 8000 timeout 10
!
!
ephone-dn 2 dual-line
number 15002
label Test2
name Test2
call-forward busy 8000
call-forward noan 8000 timeout 10
!
!
ephone-dn 9
number 8000.....
mwi on
!
!
ephone-dn 10
number 8001.....
mwi off
!
!
ephone 1
no multicast-moh
mac-address 0014.6A87.99CE
type 7940
button 1:2
!
!
!
ephone 2
no multicast-moh
mac-address 0013.C3D6.5E20
type 7940
button 1:1
!
Ambi
