Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 4.1, Call Forward All doesn't work (SIP Provider)

Hi all,

I had a previous problem with an CCME 4.0(0).

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.1ddd38eb

After upgrading to CME 4.1(0) (c2801-ipvoicek9-mz.124-11.XJ.bin) the "call transfer" (on the IP-Phone) from an incoming SIP-Call to an external number through the same SIP-Provider is working.

The "call forward all" instead build up a SIP-signaling channel (ringing on the external phone) but no RTP-flow.

(ephone-dn 6)

Here the partial config:

...

....

voice-card 0

!

!

voice call send-alert

voice call convert-discpi-to-prog

voice rtp send-recv

voice disc-pi-incoming-on

!

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service sip moved-temporarily

no supplementary-service sip refer

redirect ip2ip

h323

h245 caps mode restricted

sip

!

!

voice class codec 1

codec preference 1 g711alaw

codec preference 2 g711ulaw

!

!

!

voice class h323 1

call start slow

no call preserve

!

voice translation-rule 40

rule 1 /\(.*\)/ /0\1/

!

voice translation-rule 190

rule 1 /^0\(.*\)/ /\1/

rule 2 /^9\(.*\)/ /\1/

!

voice translation-rule 191

rule 1 /^2\([0-4].\)/ /07192099\1/

rule 2 /^7\([0-4].\)/ /07192099\1/

!

voice translation-rule 192

rule 2 /^07192099\(..\)/ /2\1/

rule 10 /.*/ /200/

!

voice translation-rule 220

rule 2 /^0\(.*\)/ /9\1/

!

!

!

voice translation-profile TP_IN_SIP

translate calling 40

translate called 192

!

voice translation-profile TP_OUT_SIP

translate calling 191

translate called 190

!

!

dial-peer voice 200 voip

description *** SIP-TRUNK (OUT/IN) ***

translation-profile incoming TP_IN_SIP

translation-profile outgoing TP_OUT_SIP

max-conn 4

destination-pattern 0.T

redirect ip2ip

max-redirects 4

session protocol sipv2

session target ipv4:21x.xx.198.140

session transport udp

incoming called-number 07192099..

dtmf-relay rtp-nte

codec g711alaw

no vad

gateway

timer receive-rtp 1200

!

sip-ua

authentication username xxx password xxxxxxx

retry invite 1

retry response 1

retry bye 1

retry register 1

retry options 0

registrar ipv4:2xx.xx.198.140 expires 60

telephony-service

load 7960-7940 P0030702T023

load 7914 S00104000100

load ATA ATA030203SCCP051201A.zup

max-ephones 30

max-dn 150

ip source-address 192.168.115.1 port 2000

calling-number local

timeouts interdigit 4

system message TEST

url services http://192.168.115.1/localdirectory

user-locale DE

network-locale CH

time-zone 23

time-format 24

date-format dd-mm-yy

keepalive 45

max-conferences 4 gain -6

call-forward pattern .T

moh music-on-hold.au

web admin system name xxx password xxx

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern .T

secondary-dialtone 0

ephone-dn 6

number 206 no-reg primary

label Temporaer(206)

description 071/920.99.06

name Temporaer

call-forward all 0079412345

ephone-dn 150 => for sip-ua registration

number 0719209900

See attached debug voip rtp output.

Any ideas ?

Thanks & greets,

Norbert

7 REPLIES
New Member

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

I'm having the same problem... Any resolution? Thanks.. It would be a big help.

Hall of Fame Super Gold

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

Hi,

if you are diverting an IP call to another IP leg, that requires IP-to-IP GW images, the ones that end with _ivs.

New Member

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

I'm running c3745-adventerprisek9-mz.124-11.XW5.bin

I just have a 3745 with a SIP trunk... If I select an extension and press Call-Forward all to another PSTN number it doesn't work (Get a recording that states " The number you are calling is not in service"

Hall of Fame Super Gold

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

Ok, I may have misunderstood the call flow.

Can you restate it again ?

If you get such a recording, one way or another, the wrong is being called.

New Member

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

Thanks in advance for you help, I really appreciate it...

I have 3745 CME 4.2 running c3745-adventerprisek9-mz.124-11.XW5.bin with a SIP Provider.

If somecalls a DID number, it rings the phone, I can then transfer it internally, or to the PSTN. Works great.

If somecalls a DID number that has CFA to an internal number it works. Here is the problem, If its set to CFA to a PSTN number. The calling party hears "Thenumber you are calling is not in service".

I did a debug voice ccapi, and verified that both numbers are showing correctly... I have no supplemental-service sip moved-temp and no supplemental-service sip refer.

I'm stumped... Is it not hairpinning or can i force it to keep both legs up, instead of dropping out of the call flow.

Hall of Fame Super Gold

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

Ok. Please collect "debug ccsip message" for the purpose of verifying the numbers again. I suspect an _ivs image will be required after all, but you should not get such message in first place.

New Member

Re: CME 4.1, Call Forward All doesn't work (SIP Provider)

Hi

I suppose the message "The number you are calling is not in service" is from the PSTN. Try the CFA without the PSTN-prefix.

Here my partial config:

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service sip moved-temporarily

h323

h245 caps mode restricted

sip

voice translation-profile TP_IN_SIP

translate calling 40

translate called 192

!

voice translation-profile TP_OUT_SIP

translate calling 191

translate called 190

voice translation-rule 40

rule 2 /\(.*\)/ /0\1/

!

voice translation-rule 190

rule 1 /^0\(.*\)/ /\1/

!

voice translation-rule 191

rule 1 /^2\([0-4].\)/ /07192099\1/

rule 2 /^7\([0-4].\)/ /07192099\1/

!

voice translation-rule 192

rule 2 /^0719209\(..\)/ /2\1/

dial-peer voice 210 voip

description *** SIP-TRUNK (IN) ***

translation-profile incoming TP_IN_SIP

translation-profile outgoing TP_OUT_SIP

max-conn 2

destination-pattern 07192099..

session protocol sipv2

session target ipv4:212.xxx.xxx.140

session transport udp

incoming called-number 07192099..

dtmf-relay rtp-nte

codec g711ulaw

no vad

!

dial-peer voice 200 voip

description *** SIP-TRUNK (OUT) ***

translation-profile incoming TP_IN_SIP

translation-profile outgoing TP_OUT_SIP

max-conn 2

destination-pattern 0.T

session protocol sipv2

session target ipv4:212.xxx.xxx.140

session transport udp

incoming called-number 07192099..

dtmf-relay rtp-nte

codec g711ulaw

no vad

!

384
Views
0
Helpful
7
Replies