Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME 4.1 delete the "@IP-CME-PROXY" from called phone number

hi,

ive a problem.

i have a working CME4.1 infrastructure with Nokia E65.

but if someone calls me on the Nokia, on the display there is the calling number with the @proxy-ip attached.

like: 5546554@10.10.10.15

but i like: 5546554

is that possible?

without translation rules?

thx

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: CME 4.1 delete the "@IP-CME-PROXY" from called phone number

Hi,

Did you install SIP voip settings tool?

It's an application to define advanced voip settings.

You have to define advanced settings via that application (installations->Sip voip settings).

Those settings are not visible in SIP settings.

-Pasi-

4 REPLIES
Bronze

Re: CME 4.1 delete the "@IP-CME-PROXY" from called phone number

New Member

Re: CME 4.1 delete the "@IP-CME-PROXY" from called phone number

thx pasi,

but i haven't any "Ignoring domain part setting" in my SIP menu on my E65.

SCCP i have already installed also licensed. but i have some "private" Phones where i can't install my sccp licenses (only for company phones)

thx.

any other ideas.

Bronze

Re: CME 4.1 delete the "@IP-CME-PROXY" from called phone number

Hi,

Did you install SIP voip settings tool?

It's an application to define advanced voip settings.

You have to define advanced settings via that application (installations->Sip voip settings).

Those settings are not visible in SIP settings.

-Pasi-

New Member

Re: CME 4.1 delete the "@IP-CME-PROXY" from called phone number

thx.

it worked fine now.

142
Views
3
Helpful
4
Replies
CreatePlease to create content